Technical Specification | Annexy International - Manufacturer, Exporter and Importer

Technical Specification

For Annexy Wall Tile

Characteristics		Pernissible Tolerance as per EN & IS norms	Typical Value of ANNEXY Wall Tiles	Test According to EN & IS norms
A. Dimensions & Surface Quality
i. Length & width Deviation in % of average size of each tile from work size.		+ 0.5%	+0.5%	EN 98 / IS 13630 Part 1

Deviation in % of average size of each tile from average size of 10 test specimens.		+0.3%	+0.3%

ii. Thickness (deviation in mm)		+0.7%	+0.7%	EN 98 / IS 13630 Part 1
iii. Straightness of sides		+0.3%	+0.3%	EN 98 / IS 13630 Part 1
iv. Rectangularity		+0.5%	+0.5%	EN 98 / IS 13630 Part 1
v. Syrface fkatbess
a. Cebter cyrvatyre
b. Edge cuvature		+0.5% / -0.3%	+0.5% / -0.3%
c. Warpage		+0.5% / -0.3%	+0.5% / -0.3%
iv. Surface quality		+0.5%	+0.5%
		95% free from visible defects	95% free from visible defects	EN 98 / IS 13630 Part 1

B. Physical Properties
i. Water absorption (%by wight)		E10	18 E 10	EN 99 / IS 13630 Part 2
ii. Moduls of rupture (N/mm2)		Average 15	MINI 15	EN 100 / IS 13630 Part 6
iii. Scratch hardness of surface (Moh's Scale)		Min. 3	Min. 3	EN 101 / IS 13630 Part 13
iv. Crazing resistance		Required	No crazing at 7.5kg / Cm2 for 2hrs.	EN 105 / IS 13630 Part 9

C. Chemical Properties
i. Resistance to household chemicals		Min. Class B	Class - A	EN 122 / IS 13630 Part 8
ii. Resistance to staining		Min. Class 2	Min. Class - 2	EN 122 / IS 13630 Part 8

Dimensioon	Thickness(mm)	Tiles per box	Area coverage pre box (Sq. m)	Av. Weight Per Box (Kg.)
300 x 200 mm	6.00	16	0.96	9.800

For Annexy Floor Tile

Pakinkg Details
Sr. No.	Size	Thickness (mm)	Pieces Per Box	Coverage area (approx) Box. Sq. Mt.	Wt. / Box Kgs. (approx)
1	300mm x 300mm	7.0	11	0.99	14.100
2	400mm x 400mm	8	6	0.96	16.250

Technical Specification
Characteristics	Floor Tiles		Method of Testing
	IS 15622:2006 Group B ll Unrectified	Annexy Floor Tiles Specifications
Physical Dimensions
1. Deviation in length	± 0.4%	± 0.4% max	IS 15622 : 2006 part 1
2. Deviation in thickness	± 5.0%	± 5.0% max	IS 15622 : 2006 part 1
3. Straightness of sides	± 0.3%	± 0.3% max	IS 15622 : 2006 part 1
4. Rectangularity	± 0.3%	±0.3% max	IS 15622 : 2006 part 1
5. Surface flatness(warpage)	± 0.5%	± 0.5% max	IS 15622 : 2006 part 1
6. Surface quality	Minimum 95% of tiles free from defects	Minimum 95% of tiles free from defects	IS 15622 : 2006 part 1

Physical Properties
1. Water absorption (%) (E)	3% < E ≤ 6%	3% < E < 6%	IS 15622 : 2006 part 2
2. Bending strength (N/mm2)	> 30 Average N/mm²	> 30 Average N/mm²	IS 15622 : 2006 part 6
3. Scratch hardness	Minimum 5	Minimum 5	IS 15622 : 2006 part 13
4. Resistance to surface abrasion	To be specified by the manufacturer	class 2	IS 15622 : 2006 part 2
5. Crazing resistance	Minimum 4 Cycles	Minimum 4 Cycles	IS 15622 : 2006 part 9

Chemical Properties
1. Resistance to satining	Minimum class 2	Minimum class 2	IS 15622 : 2006 part 8
2. Resistance to household Chemical	Minimum class B	Minimum class B	IS 15622 : 2006 part 8

Chemical Properties
1. Thermal Shock resistance	Required	Confirm	IS 15622 : 2006 part 5
2. Thermal expansion	Max. 9x10^-6 k^-1 for 100c	Max. 9x10^-6 k^-1 for 100c	IS 15622 : 2006 part 4

Note: Certain amount of size and shade variation is all ceramic products. Our conformity to the above standards is applicable only for premium Quality. Colours shown are as accurate as the limitations of the printing process will allow, prospective customers are advised to inspect a sample of the tile before ordering. Every effort has been made to ensure the accuracy of the information given. However, the company reserves the right to change the specification without prior notice, sometimes variation in shade or size being inherent to ceramic industry may occur. It is suggested to check the tiles before purchase and laying as the company does not accept responsibility one the tiles are laid.